10X Roof hooks 3-way adjustable-A2 stainless steel 1.4016 /PV photovoltaic/solar #1

High-quality roof hooks for solar modules made of A2 stainless steel

Special roof hooks for the installation of aluminum rails, profile rails, mounting rails for holding photovoltaic modules or solar systems.

Information for you:
Depending on the material or microstructure, stainless steel may or may not be magnetic. In the case of austenitic materials such as 1.4301 or 1.4404, the steel tends not to be magnetic. In contrast, ferritic stainless steel such as 1.4016 is magnetic.

Technical data:

Flat steel hook: 30 x 5mm
Base plate (thickness): 4 mm (the other two parts 5mm)
Height adjustable: 35 - 55mm
Mounting holes: 9 x 9mm offset
Slotted hole dimensions: 40 x 10mm
Weight: approx. 0.60 kg/piece

Material: A2 stainless steel 1.4016 (magnetic and rustproof)

Installation instructions:

Depending on the load, the roof hooks are fastened to the rafter with at least 2 A2 M8 plate head screws.
The length of the plate head screws should be selected to match the thickness of the rafter.
Standard sizes are
- M8x80 mm
- M8x100 mm
- M8x120 mm.
Lengths > 200 mm can be used for above-rafter insulation.
Keep a distance of 1 cm from the edge of the rafter for fastening the plate head screws.
Snow load (compression): max. 120 kg
Wind load (tension): max. 100 kg

The scope of delivery includes the three stainless steel parts shown + 2 screws with flange nuts